[itdiscuss] Component to S-Video

[Dustin Drewery]

Unfortunately, our video mixer doesn't have preview outs for each input. We
can preview one input at a time across s-video, however, we like to have all
our sources up at once on separate preview screens.  Our current preview
screens have s-video in and out so we run through them before we hit the
board.  We will be splitting our component feeds before preview now but
don't want to invest in new preview monitors yet.

 

 

Dustin Drewery - Crossroads Church IT Director

 

 

 

From: discuss-bounces at itdiscuss.org [mailto:discuss-bounces at itdiscuss.org]
On Behalf Of Rob Shaw
Sent: Wednesday, September 23, 2009 3:04 PM
To: IT Discussion Forum
Subject: Re: [itdiscuss] Component to S-Video

 

Silly question... Have you tried hooking up the component where you need to
and the plugging your preview into the S-Video jack at the same time?  (I
have a VCR at home that lets me do this)
-- 


 




  _____  

From: Dustin Drewery <ddrewery at crossroadsokc.com>
Organization: Crossroads Church
Reply-To: IT Discussion Forum <discuss at itdiscuss.org>
Date: Tue, 22 Sep 2009 21:07:09 -0500
To: IT Discussion Forum <discuss at itdiscuss.org>
Subject: Re: [itdiscuss] Component to S-Video

The LENKENG LKV7611
<http://www4.ipmart.com/main/product/LENKENG,LKV7611,Component,to,Composite,
,S,Video,Converter,,130401.php?prod=130401> looks like the best solution so
far.  We actually only need three of them.  Right now we have 3 HD cameras
and then the computer feed.. all are running s-video to our old crt preview
monitors. I'd like to go even cheaper than $64 per camera right now (yes I
know I'm greedy) but we're planning on buying a 4 display or 2x2 display HD
marshal racks mid next year.  Any other suggestions on converters?
 
Also, anybody know of a 4x1 HD multiplexer that may be cheaper than the
marshal rackmount setup?  I'm fine with all 4 preview on 1 LCD.
 
 

 



From: discuss-bounces at itdiscuss.org [mailto:discuss-bounces at itdiscuss.org]
On Behalf Of Bobby Stewart
Sent: Tuesday, September 22, 2009 5:29 PM
To: IT Discussion Forum
Subject: Re: [itdiscuss] Component to S-Video

Audio Authority 1362 Video Downconverter at RAM Electronics
http://tinyurl.com/krquvp      $450
 
Calrad Component Video Converter at RAM Electronics
http://tinyurl.com/lw8tv6 <http://tinyurl..com/lw8tv6>       $675
 
Lenkeng LKV7611 Component to Composite/S-Video Converter at i-Pmart (China)
http://tinyurl.com/l95d69      $64
 
Another Lenkeng supplier  http://www.svideo.com/lkv7611...html
<http://www.svideo.com/lkv7611.html>      $89
 
HDTVCPT387 at HDTV Supply.com (I like this one though I've never used it)
http://tinyurl.com/ljtl5x      $250
 
LE-AT-HD-AVSC at HDTV Supply.com http://tinyurl.com/ktfa2j      $450
 
AV Toolbox AVT-3190 Scan Converter at B&H Photo http://tinyurl.com/klt7tl
$395
 
 

Bobby Stewart
Network Analyst
Brentwood Baptist Church
Brentwood, TN
WWW.BrentwoodBaptist.com <http://WWW.BrentwoodBaptist.com> 
(615) 324-6149 office
(615) 830-0012 cell
 

From: discuss-bounces at itdiscuss.org [mailto:discuss-bounces at itdiscuss.org]
On Behalf Of Dustin Drewery
Sent: Tuesday, September 22, 2009 2:50 PM
To: discuss at itdiscuss.org
Subject: [itdiscuss] Component to S-Video

Anybody know a cheap and dirty way to convert Y Pb Pr (component 720p) to
s-video?  I noticed we have HD camera's but are running s-video from them
right now.  When I asked our media guys why they said its cause they don't
have it in the budget right now to buy component preview monitors.  We have
the hd switch, projectors, and everything except our 4 preview monitors only
take s-video in.  Surely there is some cheap way to convert just our preview
lines to s-video so we can go ahead and use 720p everywhere else.
 
 

 
 

  _____  

_______________________________________________
it discuss mailing list: discuss at itdiscuss.org
Mailing List: http://itdiscuss.org/discuss
Internet Relay Chat: irc://irc.freenode.net/citrt

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://optimus.thompsonic.com/pipermail/discuss/attachments/20090923/fb998ba9/attachment-0001.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 20867 bytes
Desc: not available
Url : http://optimus.thompsonic.com/pipermail/discuss/attachments/20090923/fb998ba9/attachment-0002.jpeg 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 15364 bytes
Desc: not available
Url : http://optimus.thompsonic.com/pipermail/discuss/attachments/20090923/fb998ba9/attachment-0003.jpeg